OUTAGE.GREN
Back to analysis & guides

Internet Speed Test in Greece: Measure Properly and Know What EETT Says

Outage.grPublished: 17 November 20267 min read

How to measure internet speed reliably, what EETT's YPERION tool is, and what EETT says when your speed falls below the minimum speed in your contract.

Disclosure: some links on this page are affiliate links. If you buy through them, Outage.gr may earn a commission at no extra cost to you. Whether a product appears in our articles does not depend on the commission, and we do not show prices we cannot verify.

Key Facts

  • EETT recommends measuring by cable, on an idle network, with at least 3 measurements and the same tool each time
  • The real speed is always lower than the nominal one: compare with the minimum speed in your contract
  • A deviation counts as recurring when it appears in at least 2 of 3 samples on consecutive days
  • Penalty-free contract termination (fixed): deviation above 30% (ADSL) or 20% (other technologies) not corrected within 30 days
  • Complain in writing to the provider first, then to EETT, which does not award compensation

A speed test shows a number, but the number alone does not tell you whether your connection is "bad" or whether your provider is breaching the contract. What matters is the right measuring procedure, the right figure to compare the result with and, if needed, a written complaint. This guide is based on the pages of the Hellenic Telecommunications and Post Commission (EETT) and on the YPERION tool it developed. It is not legal advice: for the exact wording the National Open Internet Regulation and your contract apply.

How to measure the speed reliably

EETT states that any measurement can be affected by factors outside the provider's line: Wi-Fi, other applications producing traffic, the computer you use and the wiring of the home. Its advice to users, as worded in the YPERION questions, is:

  • Connect by cable. EETT recommends measuring from a computer connected by cable to the home router, because Wi-Fi can limit the speed you see.
  • Keep the network idle. No other application on the computer or the local network should produce traffic (downloads, streaming, updates, other devices). EETT recommends the connection be as idle as possible before you start.
  • Not just one measurement. In its frequently asked questions on measuring broadband speed, EETT says that with at least 3 measurements you get a full picture of the quality of your connection.
  • Different times of day. EETT notes that YPERION lets you see real speeds at a given moment, for example at peak hours. An evening result is not the same as a morning one.
  • The same tool every time. To confirm a deviation, EETT says it is important to use the same measurement tool both for the initial estimate and for the later check.

If the connection drops completely and it is not a question of low speed, see the guide on where to report an internet fault and what EETT says.

YPERION: EETT's measurement tool

YPERION (hyperiontest.gr) is a system for measuring the quality of broadband connections, available to all users, which EETT developed together with Measurement Lab (M-Lab). According to its user manual, with the NDT tool you measure the speed of your wired connection, the transmission delay, the delay variation and the packet loss rate.

  • How long it takes. The manual says a typical measurement lasts 10 seconds in each direction (download and upload) and that the total duration does not exceed 30 seconds.
  • What it shows. The location of the server where the measurement was made, download and upload speed, response time, packet loss and delay variation.
  • Registration and history. With registration your measurements are recorded and you can follow the history per connection. EETT also says you can take an instant measurement.
  • Limits of the tool. In the YPERION FAQ EETT writes that the user is responsible for using the tools and that the result can be affected by the equipment and network at home.

YPERION is not the only tool. EETT says there are several tools and that the provider must give you access, through its website, to applications with which you check the speeds stated in the contract terms. If you are searching for "Nova speed test" or "Vodafone speed test", meaning your own provider's tool, look on its website or app: we have not verified where each provider's tool is located.

Nominal and real speed: what to compare with

The package you bought has a nominal speed, but that is not the figure you check your measurement against. YPERION explains that the real speed is always lower than the nominal one, because the nominal speed is a theoretical limit at the data link level. It depends, among other things, on the distance from the cabinet or exchange, line noise, congestion on the provider's network and the home network.

For fixed connections, EETT says the information from the company includes the normally available, the minimum and the maximum speed, while for mobile connections it includes only the maximum. You find these values in the contract, in the shop, on the provider's website or customer line, or in its app if you have a personal account. According to EETT, the company must update these values at least once a year.

Before you complain about anything, find the minimum speed in your own contract and write it next to your measurements.

When the speed is lower: what EETT says

The table summarises what EETT writes in its questions on the open internet and in its announcement about speeds on fixed networks. It is EETT's own description, not our interpretation.

TopicWhat EETT says
When there is a right to remedy or compensationOn fixed connections, when there are continuous or recurring deviations from the minimum speed. On mobile, when there are deviations from the maximum speed.
What "recurring" meansA deviation counts as continuous or recurring when it appears in at least 2 of 3 different measurement samples taken on consecutive days.
Examples of remediesA discount on the bill, a plan with a lower nominal speed, a refund of part or all of the standing charge, or a combination. The exact remedies are stated in your contract terms.
Penalty-free termination (fixed)When the deviation from the minimum speed is greater than 30% for ADSL and 20% for other technologies (e.g. VDSL, FTTH) and the problem is not corrected within 30 days.
Penalty-free termination (mobile)When the deviation from the maximum speed is greater than 10%, under the Regulation's conditions (measured outdoors, not moving in a vehicle).

An example, only to show the logic: if the minimum speed in your contract is 100 Mbps and you have VDSL or FTTH, the 20% threshold means a deviation counts when measurements fall below 80 Mbps in 2 of 3 samples. This calculation is our illustration, not EETT's wording: the numbers in the example are hypothetical.

What to do, step by step

  1. Find the minimum speed in your contract (contract, website or the provider's app).
  2. Measure by cable on an idle network, with the same tool, so that you have 3 different samples on consecutive days, and keep a screenshot or export of each result with date and time.
  3. File a written complaint with the provider about the deviation. EETT says the special procedure for checking a deviation is activated by a complaint to the company, and that the company gives a unique reference number and must reply in writing.
  4. If it is not resolved, file a complaint with EETT with the reference number and the correspondence. EETT says the company must reply in writing within 20 calendar days and that EETT does not resolve individual disputes or award compensation. The form steps are described in the guide to the internet complaint.

Before blaming the provider, rule out problems at home: an old router, a poor cable or Wi-Fi in a distant room. If the cable measurement is good and only Wi-Fi is slow, the problem is usually inside the home.

How Outage.gr helps

Outage.gr is an independent community platform and does not belong to any provider or to EETT. We do not measure speeds and cannot confirm your own connection. If the problem is an outage and not a slow connection, you can report the internet outage and see the map. For how providers compare in community reports (unverified user reports, not speed measurements) see the provider analysis, and for your rights in outages more generally the consumer rights guide.

Sources

Useful during outages

Affiliate links
Last updated: 17 November 2026·Outage History·Compensation Guide·All Articles